Wednesday, September 10th 2025, 3:05pm UTC+2

You are not logged in.

  • Login
  • Register

slide-in SATA HDD disk drawers for Edimax NS2502

TheoR

Beginner

Posts: 2

Location: Veghel, the Netherlands

1

Thursday, October 3rd 2019, 11:33am

slide-in SATA HDD disk drawers for Edimax NS2502

Hi All;

I am new on this forum; my name is Theo and I own an Edimax NS-2502.


Unfortunately, both disk drawers lost the notch to secure the disk drawer in the NAS housing.
My request is simple:

Who can provide me two disk drawers so that I can opperat my NAS safely again?

Many thanks in advance for you replies!
Kind Regards,

Theo

This post has been edited 1 times, last edit by "TheoR" (Oct 3rd 2019, 11:40am)

AQUAR

Trainee

Posts: 116

Location: Australia

2

Monday, October 7th 2019, 2:55pm

Hi Theo,

For testing openwrt firmware on the MVixBox (same hardware), I had to break the case to get to the serial port.

Only way to hold the box together after that was with some strong adhesive tape.

You can hold the trays in place using adhesive tape or with a rubber wedge to the frame.

It just requires a bit of DIY.

These NAS boxes are quite old now - but still used by many.
Best hope is that someone has one lying around unused.

TheoR

Beginner

Posts: 2

Location: Veghel, the Netherlands

3

Wednesday, October 23rd 2019, 1:35pm

Quoted from "AQUAR"

Hi Theo,

For testing openwrt firmware on the MVixBox (same hardware), I had to break the case to get to the serial port.

Only way to hold the box together after that was with some strong adhesive tape.

You can hold the trays in place using adhesive tape or with a rubber wedge to the frame.

It just requires a bit of DIY.

These NAS boxes are quite old now - but still used by many.
Best hope is that someone has one lying around unused.
Hi Aquar;

The tape solution will do for the time being. But I hope that someone can help me with spare part, from an unused one ;)
Thanks for responding!
Kind Regards,

Theo

Similar threads